Parity bit
This article needs additional citations for verification. (January 2013) |
7 bits of data |
(count of 1-bits) | 8 bits including parity | |
---|---|---|---|
even | odd | ||
0000000 | 0 | 00000000 | 00000001 |
1010001 | 3 | 10100011 | 10100010 |
1101001 | 4 | 11010010 | 11010011 |
1111111 | 7 | 11111111 | 11111110 |
A parity bit, or check bit, is a bit added to a string of binary code. Parity bits are used as the simplest form of error detecting code. Parity bits are generally applied to the smallest units of a communication protocol, typically 8-bit octets (bytes), although they can also be applied separately to an entire message string of bits.
The parity bit ensures that the total number of 1-bits in the string is even or odd.^{[1]} Accordingly, there are two variants of parity bits: even parity bit and odd parity bit. In the case of even parity, for a given set of bits, the occurrences of bits whose value is 1 are counted. If that count is odd, the parity bit value is set to 1, making the total count of occurrences of 1s in the whole set (including the parity bit) an even number. If the count of 1s in a given set of bits is already even, the parity bit's value is 0. In the case of odd parity, the coding is reversed. For a given set of bits, if the count of bits with a value of 1 is even, the parity bit value is set to 1 making the total count of 1s in the whole set (including the parity bit) an odd number. If the count of bits with a value of 1 is odd, the count is already odd so the parity bit's value is 0. Even parity is a special case of a cyclic redundancy check (CRC), where the 1-bit CRC is generated by the polynomial x+1.
If a bit is present at a point otherwise dedicated to a parity bit but is not used for parity, it may be referred to as a mark parity bit if the parity bit is always 1, or a space parity bit if the bit is always 0. In such cases where the value of the bit is constant, it may be called a stick parity bit even though its function has nothing to do with parity.^{[2]} The function of such bits varies with the system design, but examples of functions for such bits include timing management or identification of a packet as being of data or address significance.^{[3]} If its actual bit value is irrelevant to its function, the bit amounts to a don't-care term.^{[4]}
Parity
In mathematics, parity refers to the evenness or oddness of an integer, which for a binary number is determined only by the least significant bit. In telecommunications and computing, parity refers to the evenness or oddness of the number of bits with value one within a given set of bits, and is thus determined by the value of all the bits. It can be calculated via a XOR sum of the bits, yielding 0 for even parity and 1 for odd parity. This property of being dependent upon all the bits and changing value if any one bit changes allows for its use in error detection schemes.
Error detection
If an odd number of bits (including the parity bit) are transmitted incorrectly, the parity bit will be incorrect, thus indicating that a parity error occurred in the transmission. The parity bit is only suitable for detecting errors; it cannot correct any errors, as there is no way to determine which particular bit is corrupted. The data must be discarded entirely, and re-transmitted from scratch. On a noisy transmission medium, successful transmission can therefore take a long time, or even never occur. However, parity has the advantage that it uses only a single bit and requires only a number of XOR gates to generate. See Hamming code for an example of an error-correcting code.
Parity bit checking is used occasionally for transmitting ASCII characters, which have 7 bits, leaving the 8th bit as a parity bit.
For example, the parity bit can be computed as follows. Assume Alice and Bob are communicating and Alice wants to send Bob the simple 4-bit message 1001.
Type of bit parity | Successful transmission scenario |
---|---|
Even parity |
Alice wants to transmit: 1001 Alice computes parity bit value: 1+0+0+1 (mod 2) = 0 Alice adds parity bit and sends: 10010 Bob receives: 10010 Bob computes parity: 1+0+0+1+0 (mod 2) = 0 Bob reports correct transmission after observing expected even result. |
Odd parity |
Alice wants to transmit: 1001 Alice computes parity bit value: 1+0+0+1 (mod 2) = 0 Alice adds parity bit and sends: 10011 Bob receives: 10011 Bob computes overall parity: 1+0+0+1+1 (mod 2) = 1 Bob reports correct transmission after observing expected odd result. |
This mechanism enables the detection of single bit errors, because if one bit gets flipped due to line noise, there will be an incorrect number of ones in the received data. In the two examples above, Bob's calculated parity value matches the parity bit in its received value, indicating there are no single bit errors. Consider the following example with a transmission error in the second bit using XOR:
Type of bit parity error | Failed transmission scenario |
---|---|
Even parity
Error in the second bit |
Alice wants to transmit: 1001
Alice computes parity bit value: 1^0^0^1 = 0 Alice adds parity bit and sends: 10010 ...TRANSMISSION ERROR... Bob receives: 11010 Bob computes overall parity: 1^1^0^1^0 = 1 Bob reports incorrect transmission after observing unexpected odd result. |
Even parity
Error in the parity bit |
Alice wants to transmit: 1001
Alice computes even parity value: 1^0^0^1 = 0 Alice sends: 10010 ...TRANSMISSION ERROR... Bob receives: 10011 Bob computes overall parity: 1^0^0^1^1 = 1 Bob reports incorrect transmission after observing unexpected odd result. |
There is a limitation to parity schemes. A parity bit is only guaranteed to detect an odd number of bit errors. If an even number of bits have errors, the parity bit records the correct number of ones, even though the data is corrupt. (See also error detection and correction.) Consider the same example as before with an even number of corrupted bits:
Type of bit parity error | Failed transmission scenario |
---|---|
Even parity
Two corrupted bits |
Alice wants to transmit: 1001
Alice computes even parity value: 1^0^0^1 = 0 Alice sends: 10010 ...TRANSMISSION ERROR... Bob receives: 11011 Bob computes overall parity: 1^1^0^1^1 = 0 Bob reports correct transmission though actually incorrect. |
Bob observes even parity, as expected, thereby failing to catch the two bit errors.
Usage
Because of its simplicity, parity is used in many hardware applications where an operation can be repeated in case of difficulty, or where simply detecting the error is helpful. For example, the SCSI and PCI buses use parity to detect transmission errors, and many microprocessor instruction caches include parity protection. Because the I-cache data is just a copy of main memory, it can be disregarded and re-fetched if it is found to be corrupted.
In serial data transmission, a common format is 7 data bits, an even parity bit, and one or two stop bits. This format accommodates all the 7-bit ASCII characters in an 8-bit byte. Other formats are possible; 8 bits of data plus a parity bit can convey all 8-bit byte values.
In serial communication contexts, parity is usually generated and checked by interface hardware (e.g., a UART) and, on reception, the result made available to a processor such as the CPU (and so too, for instance, the operating system) via a status bit in a hardware register in the interface hardware. Recovery from the error is usually done by retransmitting the data, the details of which are usually handled by software (e.g., the operating system I/O routines).
When the total number of transmitted bits, including the parity bit, is even, odd parity has the advantage that the all-zeros and all-ones patterns are both detected as errors. If the total number of bits is odd, only one of the patterns is detected as an error, and the choice can be made based on which is expected to be the more common error.
Redundant array of independent disks
Parity data is used by some redundant array of independent disks (RAID) levels to achieve redundancy. If a drive in the array fails, remaining data on the other drives can be combined with the parity data (using the Boolean XOR function) to reconstruct the missing data.
For example, suppose two drives in a three-drive RAID 5 array contained the following data:
Drive 1: 01101101
Drive 2: 11010100
To calculate parity data for the two drives, an XOR is performed on their data:
01101101
XOR 11010100
_____________
10111001
The resulting parity data, 10111001, is then stored on Drive 3.
Should any of the three drives fail, the contents of the failed drive can be reconstructed on a replacement drive by subjecting the data from the remaining drives to the same XOR operation. If Drive 2 were to fail, its data could be rebuilt using the XOR results of the contents of the two remaining drives, Drive 1 and Drive 3:
Drive 1: 01101101
Drive 3: 10111001
as follows:
10111001
XOR 01101101
_____________
11010100
The result of that XOR calculation yields Drive 2's contents. 11010100 is then stored on Drive 2, fully repairing the array. This same XOR concept applies similarly to larger arrays, using any number of disks. In the case of a RAID 3 array of 12 drives, 11 drives participate in the XOR calculation shown above and yield a value that is then stored on the dedicated parity drive.
Extensions and variations on the parity bit mechanism "double," "dual," or "diagonal" parity, are used in RAID-DP.
History
A "parity track" was present on the first magnetic tape data storage in 1951. Parity in this form, applied across multiple parallel signals, is known as a transverse redundancy check. This can be combined with parity computed over multiple bits sent on a single signal, a longitudinal redundancy check. In a parallel bus, there is one longitudinal redundancy check bit per parallel signal.
Parity was also used on at least some paper-tape (punched tape) data entry systems (which preceded magnetic tape systems). On the systems sold by British company ICL (formerly ICT) the 1-inch-wide (25 mm) paper tape had 8 hole positions running across it, with the 8th being for parity. 7 positions were used for the data, e.g., 7-bit ASCII. The 8th position had a hole punched in it depending on the number of data holes punched.
See also
References
- ^ Ziemer, RodgerE.; Tranter, William H. Principles of communication : systems, modulation, and noise (Seventh ed.). Hoboken, New Jersey. ISBN 9781118078914. OCLC 856647730.
- ^ "What is the difference between using mark or space parity and parity-none".^{[unreliable source?]}
- ^ "What is the purpose of the Stick Parity?".
- ^ "Serial Communications", Sat-Digest, retrieved 2020-03-23